| |
|
|
 |
 |
| |
Product Code |
Product Suffix |
Product Description |
|
Product: |
AM700 |
|
AERO-MAX Prime Etch |
|
Used In: |
Diamont |
|
Used As: |
Adhesion Promotor & Primer |
|
|
|
|
Thing to DO:
* Do spray product in properly ventilated area.
* Do use the appropriate NIOSH/MSHA respirator. Consult product label for details.
* Do shake container for two minutes and spray a small area to test product before starting the job.
* Do turn the container over and spray to clear the nozzle when spraying is completed.
* Do spray 0.5 - 1.0 mil of primer to both surfaces to be welded, additional film thickness decreases welding efficiency.
* Do allow primer to throughly dry before welding.
Things NOT to DO:
* Do not leave or store containers in direct sunlight. Normal recommended storage: 50°F to 100°F.
* Do not apply 2K polyester putties, 2K epoxy coatings or waterborne basecoats over.
* Do not incinerate container. Contents under pressure.
* DO NOT OVERCOAT with 2K epoxies and 2K polyester products.
* DO NOT weld while primer is still wet.
|
 |
|
|
